Key points and methods of transportation of the ho

2022-07-29
  • Detail

Introduction to the key points and methods of transportation of ceramic floor tile packaging materials

packaging of sanitary ceramics is divided into cartons. At the central economic work conference, General Secretary Xi made a high-level summary of "3 characteristics" and 9 trends for China's economy to enter the "new normal", including checkered wooden cases. The simple ones are also bundled with straw ropes

the material of cartons for export products shall comply with the provisions of gb5034, and the material of cartons for domestic products shall comply with the provisions of gb6544. Checkered wooden cases are usually made of red and white pine boards. The filling material is generally foamed plastic or other properties. When the power switch is turned on, the system has no power display? Similar materials. Corrugated boxes can be stapled and bonded. When nailing the composite box, the spacing between cloth nails shall not be greater than 70mm. When gluing the box, adhesive tape or strong adhesive tape shall be used, and its width shall not be less than 50mm

for the convenience of handling, the mass of each package shall not exceed 50kg

the package shall be clearly marked with product name, model, grade, color, manufacturer, etc

packaged products should be stored in a dry, clean and well ventilated warehouse. High precision, grade and color code according to variety and model

size less than 400mm × The 400mm ceramic wall and floor tiles are generally packed in cartons. The material of cartons for export products shall comply with the provisions of gb5034

, and the material of cartons for domestic products shall comply with the provisions of gb6544. Generally, one box is 1m2 or 1.5m2

large size ceramic tiles are generally bare so that they can move freely. According to the quality of tiles, 2 ~ 4 tiles are a package. First fix the four corners of the brick with special foam plastic, and then use strong

adhesive to fix them to each other. This packaging saves board boxes, and the edges and corners of the brick are not easy to be magnetized, reducing the loss in transportation

there shall be clear trademark on the back of the product. The packing box shall be marked with the name, trademark, specification, grade number, color number, etc

source: SouFun

Copyright © 2011 JIN SHI